Keep Your Jeep in Peak Condition
 |
| Jeep Maintenance Made Easy! |
Routine Fluid Maintenance
-
▢ Engine Oil
-
Change every 5,000 miles (synthetic) or 3,000 miles (conventional)
-
Don’t overtighten the oil filter cap on 3.6L engines (torque to 25 Nm)
-
-
▢ Transmission Fluid
-
Change every 30,000 miles
-
Inspect for fluid level and clarity
-
-
▢ Transfer Case Fluid
-
Change every 30,000 miles
-
Use Jeep-approved fluid only
-
-
▢ Differential Fluid
-
Change every 30,000 miles
-
Check for gear oil leaks at the differential covers and axle seals
-
-
▢ Brake Fluid
-
Replace every 2 years or 24,000 miles
-
Look for darkened fluid or air in the lines
-
-
▢ Coolant/Antifreeze
-
Check level in overflow tank and radiator when engine is cold
-
Replace every 5 years or as recommended
-
Only use the correct coolant type to avoid chemical reactions (e.g., pink organic coolant issues)
-
Top Places to Check for Leaks
Use this list to visually inspect your Jeep for potential fluid leaks:
-
▢ Radiator (bottom side)
-
▢ Oil Filter Housing Adapter
-
▢ Rear Main Seal
-
▢ Front and Rear Differentials
-
Check around the diff covers, pinion seals, and axle shafts
-
Look for gear oil leaks and splatter on undercarriage
-
-
▢ Transmission and Transfer Case
Additional Maintenance Must-Dos
-
▢ Tire Rotation (every 5,000 miles)
-
Helps prevent uneven wear
-
While rotating, inspect brake pad thickness
-
-
▢ Inspect Brake Pads
-
▢ Air Filter Replacement
-
Every 15,000–30,000 miles
-
Replace sooner if driving in dusty/off-road conditions
-
-
▢ Undercarriage Care
-
▢ Check for Fluid Cross-Contamination
Pro Tip:
Regular inspections can help you catch leaks and worn components before they cause serious (and expensive) damage. Keep a log of maintenance dates and fluid changes!
